2" x 12" Frame Rail 2-pack
Nominal: 3/4" x 2" x 14"
Cut for creators, framing components let you build custom frames by choosing the right rail lengths to fit your project. Each 2-pack of rails is used to frame 2 sides -- so you need two 2-packs to build a 4-sided frame. Choose from our available lengths to create the frame that fits your artwork.
Is your artwork 12" x 12"? Choose two 12" Frame Rail 2-packs.
Is your artwork 12" x 18"? Choose one 12" Frame Rail 2-pack and one 18" Frame Rail 2-pack.
Rails are sanded and ready to finish with your favorite paint, stain, vinyl decals, and more. It's never been easier or more affordable to have custom-framed decor in every room of the house.
Two frame pieces with a 12" routed groove designed to hold panels of 1/4" thickness
Mix + match rail lengths available to fit your decor project.
Ready to customize with the finishes of your choice, including paint, stain, vinyl decals, and sealant.
Intended for indoor use only. If using outside, seal with a weather-protecting finish and place in a covered or protected area.
- Convenient, ready-to-use component for custom framing projects
- Routed channel fits 12" of 1/4"-thick material
- Actual dimensions:
- 0.75" Thick x 1.5" Wide
- 11.25 Inside Channel Length
- 14.25" Outside Length
- Channel is 3/8" Deep x 1/4" Wide
- Tolerance: +/- 1/8"
- Weight: Approx. 1 lb per pack
- Grade + Species: D-grade SYP (Southern Yellow Pine) or J-grade or equivalent SPF (spruce/pine/fir)
- California residents, see Prop 65 Warning Fact Sheet for wood dust
Do I need to buy two 2-packs of Frame Rails to frame my project on all four sides?Yes, each 2-pack is used to frame 2 sides -- so you need two 2-packs to build a 4-sided frame. Choose from our available lengths to create the frame that fits your artwork. Is your artwork 12" x 12"? Choose two 12" Frame Rail 2-packs. Is your artwork 12" x 18"? Choose one 12" Frame Rail 2-pack and one 18" Frame Rail 2-pack.
How do I know if my project will fit inside the routed frame rails?Handprint offers many wood surfaces in 1/4" thickness, perfect for use with our frame rails. And if you don't want to have to cut your panels down to fit, choose from our selection of 12" and 18" precut sizes that can easily be framed using our 2" x 12" Frame Rail 2-packs and our 2" x 18" Frame Rail 2-packs.
How do I use the Frame Rails to assemble my frame and secure my artwork inside it?Run a bead of wood glue down the inside length of each routed channel before sliding or placing it onto the edge of your project. As well, apply wood glue at the four corners, along with 1 or 2 small finishing nails.