1" x 3" - 2' Sanded Boards 4-pack

Nominal dimensions reference the size of the wood before it was cut and sanded. Actual dimensions are the size the product is when it arrives in the store or at your door, and it’s the size you can count on to work with.
Actual: 0.75" x 2.5" – 24"
Nominal: 1" x 3" – 24"
Size: 3" width

Cut for creators, sanded, white wood boards are as versatile as they are easy to handle and transport. Featuring clean, smooth surfaces, this handy 4-pack is perfect for a wide variety of home decor and craft projects. Ideal for custom finishes like paint and stain, or leave natural for a clean, simple look.

  • Pack of 4, 1"-thick, 3"-wide, 2'-long, sanded white wood boards
  • Actual dimensions: 0.75" x 2.5" - 2'
  • Coverage area per pack: 1.7 sq. ft.
  • Tolerance: Thickness and Width +/- 1/16"; Length +/- 1/8"
  • Weight: Approx. 1 lb each, 4 lbs per pack
  • Grade + Species: D-grade SYP (Southern Yellow Pine) or J-grade or equivalent SPF (spruce/pine/fir)
  • California residents, see Prop 65 Warning Fact Sheet for wood dust
  • Can these boards be used outside?
    Any board that isn't pressure treated isn't going to last long outside without a weather-resistant protectant sealer. For best results outdoors, use polyurethane or polycrylic. Both increase durability and are moisture- and heat-resistant.
  • What is the difference between nominal and actual dimensions?

    Nominal dimensions are the sizes wood products are commonly called, as well as the size the wood was before it was cut, sanded, planed, surfaced, etc. The actual measurements are the final size you purchase and the size you have to work with.

    For example, a 1" x 4" - 2' Sanded Board has nominal dimensions of 1" x 4" – 24" and actual dimensions of 0.75" x 3.5" – 24".

    You can find our nominal and actual dimenions on each product's page, just below its name:

    1" x 4" - 2' Sanded Boards 4-pack
    Actual: 0.75" x 3.5" – 24"
    Nominal: 1" x 4" – 24"

    Read more....

  • Will climate affect my boards?
    Our boards are kiln-dried during manufacturing which adds stability and works to minimize warp and shrinkage. However, if your climate or home environment is quite hot and humid or cold and dry, we recommend giving your boards a few days to acclimate before starting your project.

Join our community of makers!

Thanks for signing up!
There was an error with your request, please try again later.